Silicone glue

Wacker’s Elastosil® E-41 silicone adhesive is highly suitable for bonding silicone components with each other. Once bonded, silicone parts are almost impossible to separate from one another after curing of the adhesive, resulting in it being well suited for bonding silicone cords and/or silicone profiles to each other.
Elastosil® E-41 transparent silicone adhesive ⁄ 90 ml tube.

Values applicable for adhesive in cured state:

Hardness:  30° Shore A
Colour:   transparent
Specific density:  4.5 N/mm2 
Tensile strength:   500%
Elongation at break: 13 N/mm.
Tear strength:   1.09 g/cm3 
   

PROCESSING INSTRUCTIONS / ELASTOSIL ADVICE:
Clean parts to be bonded with acetone and degrease really well; smear on one side with Elastosil, approx. 1 mm. thick.
Allow the workpiece to cure for approx. 24 hours, preferably clamped in a jig. After approx. 8 hours, curing is such that the workpiece may be carefully removed from the jig. Elastosil® silicone adhesive is also extremely good for use when assembling and/or bonding silicone components with other materials. The silicone adhesive not only specifically adheres to silicone products but also for example, to glass/ wood/ metal and other types of rubber. Because of this again, the adhesive is multifunctional. The silicone adhesive is available from Siltech in individual 90ml. tubes.

 

Building

bouw

Machinery

industrie

Medical

medici

Aerospace

luchtvaart

Shipping

scheepvaart